Lab 05

When you installed your initial Windows server with AD, you also installed a DNS server as part of the installation. In this lab you will install a second Windows 2022 Desktop Experience version of Windows Server.

1. Install a new Windows 2022 server desktop experience similar to how you installed CPTR230A.
2. Name it cptr230b
3. Enable remote management
4. Enable remote desktop
5. Set the IP address to 192.168.1.3, Gateway=192.168.1.1, DNS=192.168.1.2
6. Set up the time zone
7. Join it to the domain

8. Install the DNS server: Install-WindowsFeature -Name DNS -IncludeAllSubFeature -IncludeManagementTools

9. Configure cptr230a sever to allow zone transfers to cptr230b.
10. Create a secondary Zone on cpte230b for your root domain
11. Perform a zone transfers for the secondary zone
12. Configure DNSSEC on the primary zones of your domain
    1. Make sure both servers are showing the DNSSEC entries.
    2. You may have to perform an additional zone transfer.
13. Change your DHCP server to include both DNS servers.

Documentation

Include the following information:

• Updated network diagram and documentation.
• Document the DNS system as it is at the end of this lab in the networking page.
  • DNS Servers
  • DNS Zones
  • Security features
  • Secondary DNS installation procedures

Video Grade Guide