Differences between revisions 12 and 13

Lab 06: DHCP

In this lab we will setup a DHCP server and use it from the Windows 10 Client.

Setup a DHCP server
1. Setup the DHCP server on CPTE230a include the tools.
2. Install the DHCP Server tools "feature" on CPTE230w windows 10 machine (Remember we will do most of our administration from CPTE230c)
Using the DHCP manager on CPTE230a setup a scope called 192.168.1.0/24
1. The range of addresses should go from 192.168.1.10 - 192.168.1.254
2. Length = 24
3. Subnet Mask = 255.255.255.0
4. Click next accepting defaults until you get to the "Configure DHCP Options" - Yes
5. Router = 192.168.1.1
6. Make sure DNS is set to 192.168.1.2
7. Skip WINS server configuration
8. Answer Yes, I want to activate this scope now.
9. Create a reservation for your windows 10 machine and set it to always get 192.168.1.5
10. Finish.

Configure your Windows 10 Client to use DHCP

Verify that you can surf the internet from this machine.
Verify that you can manage the DHCP server from your windows 10 machine (login as administrator).

Documentation

Document your work on the networking page in a new section called DHCP. Include:

Topics	Points
Video shows: Client configured to use the DHCP server with ipconfig /all	50
Video shows: run the RSAT tool DHCP - logged in as administrator	30
Video talks through the documentation additions.	20

-  ⇤ ← Revision 12 as of 2016-10-04 13:13:11 → 
  Size: 1445
  Editor: scot
  Comment:
+   ← Revision 13 as of 2017-10-03 21:21:25 → ⇥
  Size: 1546
  Editor: scot
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 5:
-  a. Setup the DHCP server on CPTE230C
  a. Install the DHCP Server tools "feature" on CPTE230A (Remember we will do most of our administration from CPTE230a.
 1. Using the DHCP manager on CPTE230A setup a scope called 192.168.1.0/24
+  a. Setup the DHCP server on CPTE230a include the tools.
  a. Install the DHCP Server tools "feature" on CPTE230w windows 10 machine (Remember we will do most of our administration from CPTE230c)
 1. Using the DHCP manager on CPTE230a setup a scope called 192.168.1.0/24
 Line 16:
+  a. Create a reservation for your windows 10 machine and set it to always get 192.168.1.5
-Line 33:
+Line 34:
-||Video shows: run the RSAT tool "Active Directory Users and Computers" from the client machine ||30 ||
+||Video shows: run the RSAT tool DHCP - logged in as administrator ||30 ||