Differences between revisions 24 and 25
Revision 24 as of 2023-10-18 21:04:48
Size: 1692
Editor: scot
Comment:
Revision 25 as of 2023-10-18 21:06:51
Size: 1677
Editor: scot
Comment:
Deletions are marked like this. Additions are marked like this.
Line 14: Line 14:
 1. Configure cptr230a sever to allow zone transfers to cptr230b and vice versa.  1. Configure cptr230a sever to allow zone transfers to cptr230b.

Lab 05

When you installed your initial Windows server with AD, you also installed a DNS server as part of the installation. In this lab you will install a second Windows 2019 core version of Windows Server.

  1. Install a new Windows 2019 server desktop experience similar to how you installed CPTR230A.
  2. Name it cptr230b
  3. Enable remote management
  4. Enable remote desktop
  5. Set the IP address to 192.168.1.3, Gateway=192.168.1.1, DNS=192.168.1.2
  6. Set up the time zone
  7. Join it to the domain
  8. Install the DNS server: Install-WindowsFeature -Name DNS -IncludeAllSubFeature -IncludeManagementTools

  9. Configure cptr230a sever to allow zone transfers to cptr230b.
  10. Create a secondary Zone on cpte230b for your root domain
  11. Perform a zone transfers for the secondary zone
  12. Configure DNSSEC on the primary zones of your domain
    1. Make sure both servers are showing the DNSSEC entries.
    2. You may have to perform an additional zone transfer.
  13. Change your DHCP server to include both DNS servers.

Documentation

Include the following information:

  • Updated network diagram and documentation.
  • Document the DNS system as it is at the end of this lab in the networking page.
    • DNS Servers
    • DNS Zones
    • Security features
    • Secondary DNS installation procedures

Video Grade Guide

Topics

Points

Video Shows: DNS configuration as described in the instructions Both primary and secondary zones of each domain

60

Video talks through the documentation required.

40

WindowsAdministration/Lab05SetupSecondaryDns (last edited 2023-10-18 21:06:51 by scot)