|
Size: 1521
Comment:
|
Size: 17817
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 13: | Line 13: |
| === Common Elements === || Section || Element Identifier || Element Type || Description || || 0.None || || || || || || Cleanup || Boolean || Check only if debris is interseasonal erosion and if there are pottery, bones, and other objects that need listing || || || Balk Removal || Boolean || Check only if you excavated a locus during the balk removal and you don't have the original locus sheet || || 1.Identification || || || || || || A.Locus || Integer || IF there exists true in section 0. This is a Cleanup or Removal Excavation NOTE DEV. from Manual due to database constraints. || || || B.Site || Char || Single Char identifier of site || || || C.Season || Integer || Convention is last two digits of year --> Bah make it four digits || || || || || || |
Identical Sections include the identity, rationale === Earth Locus === The earth locus sheet is the most common form used. Technically everything under 1. should be identifying (Key). However this is preposterous and we will assign a surrogate key. ||Section || Element Identifier || Element Type || Default || Description || || 0.None || || || || || || || Cleanup || Boolean || False || Check only if debris is interseasonal erosion and if there are pottery, bones, and other objects that need listing || || || Balk Removal || Boolean || False || Check only if you excavated a locus during the balk removal and you don't have the original locus sheet || || 1.Identification || || || || || || || A.Locus || Integer || None || IF there exists true in section 0. This is a Cleanup or Removal Excavation NOTE DEV. from Manual due to database constraints. || || || B.Site || Char || None || Single Char identifier of site || || || C.Season || Integer || Year(today) || Convention is last two digits of year $\rightarrow$ Bah make it four digits || || || D.Field || Char || None || Single letter field designation || || || E.Square || varchar(8) || None || Sample: "6L46" or "A6" seems random. || || || F.Start_Date || Date || Today() || Sample: 18 Jul 2009 [dd/mm/yyyy] || || || F.End_Date || Date || NULL || same. || || || G.Sheet || Integer || NULL || '''NOT USED!}''' When we print out sheets they will have page numbers || || || H.Supervisor || varchar(25)[] || NOT NULL || If you worked on this sheet add your name to the list! || || || I.BALK || char(1) || NULL || Used for balk removal (seldom used) || || || J.Designation || varchar(80) || NULL || Free form description of the layer || || 2.Rational || || || || || || || A.Reason || varchar(80) || NULL || Free form reason for change (Color change,...) || || || B.Separability.Top || selection || Average || Selection from '''Required Entity Separability_Listing(ID,{Very Clear, Clear, Average, Unclear, Very Unclear, Arbitrary})''' || || || B.Separability.Bot || selection || Average || Bottom of locus is from Separability Entity || || 3.Description || || || || ''Description is significantly different across loci forms'' || || || A.Color.1.Munsell_Number || varchar(10) || NULL || || || || A.Color.2.Verbal || varchar(50) || NULL || || || || B.Texture.1-4 || Mutli-dep || NONE || Intersection table with Texture '''Required Entity Texture(Texture_ID,Texture_Description)''' || || || C.Particle_Shape.1-4 || Multi-dep || NONE || Association table with '''Required Entity Particle_Shape(Particle_Shape_ID,Particle_Description:{Angular, Subangular, Subround, Round)''' includes percentage || || || D.1.Consistence.Hardness || int || 3 || values 1-6 || || || D.2.Consistence.Compactness || int || 0 || Use list Entity '''Earth_Compactness(Compactness_ID, Compactness_Description) ''{Loose, Crumbly, Friable, Firm, Gravelly, Rubbly}X{Slightly, Moderately, Very}''''' || || || D.3.Consistence.Wetness || int || 0 || Use list Entry '''Earth_Wetness(Wetness_ID, Wetness_Description) ''{Dry, Moist, Wet}X{Slightly, Moderately, Very}''''' || || || D.4.Consistence.Structure || int || 0 || Use list Entry '''Earth_Structure(Structure_ID, Structure_Description) ''{Puddling water, Channeling water, Sheet wash water, Wind, Talus, Random}'''''|| || || E.1.a-d.Stone_Inclusion || asc || || Each inclusion has a distribution associated with it now (a bit more data) '''Required Entity Inclusion(InclusionTypeID, Description, Class) Class:{Stone, Earth, Artifact, Organic}|| || || E.2.a-f.Earth_Inclusion || asc || || Use association table Inclusion '''include Distribution={Random, Patterned+char, Layered+char}''' || || || E.3.a-k.Artifact_Inclusion || asc || || Use association table Inclusion '''include: Frequency, Distribution, Dist_Remark''' || || || E.4.a-f.Organic_Inclusion || asc || || Use association table inclusion '''include: Frequency, Distribution''' || || || F.Measurements || child || || Children will have Locus Identity in '''Required Entity Locus_Points(OBJECTID, SHAPE, File_Name_Imported, Locus_Identity)''' Note: OBJECTID and SHAPE are maintained by ArcINFO and we don't mess with them. In this case, it's the key. || || || G.Surface_Material.1-8 || asc || || Use association table with '''Required Entity Surface_Material(Surface_Material_Type_ID, Surface_Material_Description) || ||||<(> 4.Stratigraphy.Shape || child || || '''Required Entity Locus_Points(OBJECTID, SHAPE, File_Name_Imported,Locus_Identity || ||||<(> 4.Stratigraphy.A-G.Relation || asc || || Use association table '''Stratigraphy_Relation(This_Locus_Identity, Related_Locus_Idenity, Relationship:{Under, Over, Equals, Contiguous to, Seals Against, Cut by, Over Foundation}, remarks)''' || || 5.Levels || || || || Spatial Object Query - We now collect all spatial information with the Total Station. Therefore this section now is just a reference to the coordinates take at different times. Use Locus_Points Table || || 6.Identification || || || || Printed header on subsequent pages - not recorded! || || 7.Pottery || child || || || '''Requires Entity: Locus_Pottery_Bucket(Locus_Identity, Pail_ID, Date, Total_Debris_Baskets, Location, Comments) see figure on p.26''' || || 8.Bones || child || || || Locus_Bone_Bucket '''Requires Entity: identical to Locus_Pottery_Bucket''' || || 9.Seeds || child || || || '''Requires Entity: Seeds(Locus_Identity, Pail_ID, Date, Sample#, Location, Reading)''' || || 10.Objects || || || || Similar to Seeds model - '''Requires Entity: Object(Pail\#,Date,Field\#,Spatial Coordinates Set\#,Reading) : Associated with pictures,loci...''' || || 11.Photographs || || || || List of photo numbers model - intersection table. || || 12.Biodata Samples || Bio_Data_Samples || varchar(80) || Pollen || PROGRAMMING: list elements to check, allow additional information to be typed. The combination goes here. || || 13.Drawings || || Intersection Table || NULL || '''Requires Entity: Drawing(ID,Image,...)''' || || 14.Interpretation || || || || || || || A.Fucntion || varchar(500) || NULL || What was this loci used for in antiquity || || || B.Stratigraphy || varchar(500) || NULL || This is a textual check on the data that we collect with the total station || || || C.Clean_Locus || boolean || false || Did this layer produce pottery from one period only with no mixing of ceramic horizons? Yes$\rightarrow$ true || || || D.Locus_Period_Date || varchar(50) || NULL || Excavators dating of the layer || || || E.Phase || varchar(25) || NULL || Completed later ... || || || F.Stratum || varchar() || NULL || Completed later ... || == Architectural Locus == There is an inconsistancy in MPP that allows an architectural locus to be a subsidiary locus to some other architectural locus. This creates a locus sheet with an identical locus number but a different "locus" making a locus or (sublocus) the most basic element in archaeology. We fix this inconsistancy by moving the J. FOUND(ation) and K.Phase out of the identification and put it into the stratigraphy relationship section. A wall locus then has a architectural-foundation relationship with a foundation instead of having a sub-locus. This makes a substantial change in the Handbook on how to use the forms. '''HANDBOOK CHANGE: 15.J and 15.K should list the related locus and relationship type and phase number respectively. The locus gets a unique number.''' Identification, Rationale = Earth Locus ||Section || Element Identifier || Element Type || Default || Description || || 17.Description || || || || || || || A.Material.1-6 || multi-dependency || NULL || Linked to list containd in '''Require Entity _Materials_Used_List(LocusID, MaterialID [Note 1], percent:integer), This is associated with another Required Entity Materials_Quantifier_List(Materials_Quantifier_ID, Materials_Quantifier_Description [Note 2])''' ''IF type=Mudbrick, Require Fill out "Earth Supplement Form" || || || A.Masonry.7.Architectural_Fragments_Count || int || 0 || Very rare prior to Hellenistic period || || || A.Masonry.8.Origin_Quarry || varchar(50) || NULL || Rare: Entered by specialist when known || || || A.Masonry.X.Reused || Multi-dependency || NULL || '''Required Child Entity Reused_Stone(Locus_Found:Locus_ID,Locus_From:Locus_ID, Percent_Mass:Integer) || || || B.Masonry.1.a-f.Wall_Stones || Multi-dependency || NULL || Externally Linked via '''Required Entity Wall_Stones(Locus_ID,type:char(15)[Note 3], percent:integer)'''|| || || B.Masonry.2.a-c.Chink_Stones || Multi-dependency || NULL || Externally Linked via '''Required Entity Chink_Stones(Locus_ID,type:char(15)[Note 4], percent:integer)'''|| || || B.Masonry.3.a-f.Fill_Stones || Multi-dep || NULL || Externally Linked via '''Required Entity Fill_Stones{Locus_ID, type:char(15)[Note 3], percent:integer)'''|| || || B.Masonry.4.Brick_Width_Min || int || NULL || Smallest width dimension of bricks in a brick wall || || || B.Masonry.4.Brick_Width_Max || int || NULL || Largest width dimension of bricks in a brick wall || || || B.Masonry.4.Brick_Length_Min || int || NULL || Smallest length dimension of bricks in a brick wall || || || B.Masonry.4.Brick_Length_Max || int || NULL || Largest length dimension of bricks in a brick wall || || || B.Masonry.4.Brick_Thickness_Min || int || NULL || Smallest thickness dimension of bricks in a brick wall || || || B.Masonry.4.Brick_Thickness_Max || int || NULL || Largest thickness dimension of bricks in a brick wall || || || C.Dressing || Multi-dependency || NULL || Externally Linked via '''Required Entity Dressing(Locus_ID,type:char(15)[Note 5], percent:integer'''|| || || D.Tooling_Width_Min || int || NULL || Minimum tooling width to describe tool || || || D.Tooling_Width_Max || int || NULL || Maximum tooling width to describe tool || || || D.Tooling_Length_Min || int || NULL || Minimum tooling length to describe tool || || || D.Tooling_Length_Max || int || NULL || Maximum tooling length to describe tool || || || D.Tooling_Images/Photo || Multi-dep || NULL || Drawings or photos will be associated with a locus via 11, 13 entities shown in the earth locus || || || E.Mortar || Multi-dep || NULL || Externally Linked via '''Required Entity Mortar_Used(Locus_ID,type(char(15)[Note 6], percent:integer)'''|| || || E.Mortar.Thinkness_Avg || int || NULL || Average thickness in cm|| || || F.Facing_Type || Multi-Variable || bit || One variable for each type in [Note 7]|| || || F.Facing_Images || Multi-dep || NULL || Drawings or photos will be associated with a locus via 11, 13 entities shown in the earth locus|| || || F.Description || varchar(512) || NULL || Added descripton field for painted or unique features || || || F.Facing_Color || varchar(10) || NULL || Muncel Color || || || G.Construction.1.Style || Multi-Dependency || NULL || intersection table with '''Required Entity Construction_Style(Construction_Style_ID, Construction_Style_Description [Note 8])''' || || || G.Construction.2.Support || multi-dep || NULL || intersection table with '''Required Entity Construction_Support(Construction_Support_ID, Construction_Support_Description) [Note 9]''' || || || G.Construction.3.Tendencies || varchar(400) || NULL || See manual - to catch the mood of the builders... || || || H.Courses.Min_Number || int || 0 || Minimum courses or 0 if random || || || H.Courses.Max_Number || int || 0 || Maximum courses (could be Minimum) or 0 if random || || || H.Courses.Random || boolean || false || Just a check - if you left the others 0 and this false, something is wrong! || || || I.Rows || NONE || || Course is the one brick/block/rock high. Rows indicate the number of rows wide in a course || || || -.1.Minimum_Number || int || 0 || Min number of rows 0 indicates holes or gaps || || || -.1.Maximum_Number || int || 1 || Max number of rows X indicates max number of identifiable rows || || || -.2.Includes_Rubble || boolean || false || || || || -.3.Description || varchar(100) || NULL || Was something unusual? Describe it in 100 characters or less || || || -.4.Random || boolean || false || Does it look like your pathfinder group was given rocks and mortar and told to make a wall? Click yes then.|| || || J.Measurements.1.Greatest_Length || int || 0 || Longest part of wall in meters. || || || J.Measurements.2.Width_Min || int || 0 || Narrowest part of wall in meters. || || || J.Measurements.2.Width_Max || int || 0 || Longest part of all in meters. || || || J.Measurements.3.Height_Min || int || 0 || Shortest part of wall in meters. || || || J.Measurements.3.Height_Max || int || 0 || Tallest part of all in meters. || || || J.Measurements.4.Orientation || int || 0-179 || Give the compass direction of the wall from 0-179 degrees. || || || J.Measurements.5.Dip || int || 0 || Give the degree of slope if the wall runs downhill. || || || K.Preservation.1-7 || int || 1 || Look up in '''Required Entity Wall_Preservation_Description(ID:int, Description:varchar(50)[Note 10])''' || || || K.Preservation.8.Lean_Direction || int || 0 || Certainly going to be 90 degrees off of Orientation || || || K.Preservation.8.Lean_Degrees || int || 0 || Use a clinometer to find the lean amount || || || K.Preservation.9.Top_Of_Foundation || int || 0 || Elevation in Meters || || || L.Remarks || varchar(320) || NULL || Did we miss anything? Put it here. You got 320 characters (4 lines of text) to do it in.|| |||||||||| 18-28 match sections 4-14 in the Earth locus || Notes: 1. Choose {Limestone, Chert, Basalt, Nari, Mudbrick (E), [Allow Additional]} 2. Choose {None, Hard, Soft, Cherty, Fossiliferous, Decayed, Freshly quarried, reused, Oven-backed, Sun-backed, Unbacked, Burned, [Allow Additional]} 3. Choose {Cobble [6-25 cm), Sm Boulder [25-50 cm), Md Boulder [50-75 cm), Lg Boulder[75-100 cm), Vlg Boulder (>=1 m)} 4. Choose {Pebble (.2-6 cm), Cobble [6-25 cm), [Allow Additional]} 5. Choose {Unhewn, Semi-hewn, Dressed, Ashlar, Bossed} 6. Choose {Dry-laid, Clay (E), Mud (E), Cement (E), Plaster (E), Lime (E), [Allow Additional]} 7. Choose {Unfaced, Plaster (E), Mud (E), Paint (draw)} 7. Bit Variables {Unfaced, Plaster, Mud, Paint} 8. Choose {Boulder & Chink, Ashlar Fit, Header-stretcher, Rubble-filled, Rubble, Stacked Bricks, Tied-in Bricks, Quoin & Pier, Orthostat, [Allow Additional]} 9. Choose {Free-standing, Buttressed, Battered, Foundation, [Allow Additional]} 10. Choose {Complete, Partial Superstructure: Most, Partial Superstructure: Half, Partial Superstructure: Little, Foundation Only: Complete, Foundation Only: Partial, Robbed} (E) - Requires Earth Supplement Sheet. NOTE ALSO, we now associate supplement sheets with a locus including an association field to describe the element of the locus supplemented. (draw) - Requires Facing image NOTE ALSO, we now associate drawings and photos with a locus including an association field to describe the element of the locus drawn or photographed. === Installation Locus === Installation Loci are unique in that they have a '''type section''' and a qualifier to identify how certain we are of that type. We also allow new types of installations be be added. The '''Material Section''' is identical to 17.A Material section in the Architectural locus except that we allow more types of materials. '''''SO WE MAKE THE SALOMON LIKE DECISION TO USE THAT TABLE OF MATERIALS.''''' ||Section || Element Identifier || Element Type || Default || Description || |||||||||| 29-30 match sections 1-2 in the Earth locus || || TYPE |||||||||| || || Installation_Type_ID || int || NULL || References '''Required Entity Installation_Type_List(Installation_Type_ID:int, Installation_Type_Description:varchar(25))''' || || || Installation_Qualifier_ID || int || NULL || References '''Required Entity Installation_Qualifier_List(Certainty_Qualifier_ID:int, Certainty_Qualifier_Description:varchar(25))''' || |||||||||| 32.A match section 17.A in the Architectural locus. See the notes above. || || B || Plan_ID || int || NULL || references '''Required Entity Plan_List(Plan_ID, Plan_Description)''' || || || Plan_Qualifiers || Multi-Dep. || NULL || intersection with '''Required Entity Plan_Qualifiers''' || || || Plan_Remarks || varchar(255) || NULL ||Plan Remarks || || C || Lining || Multi-Dep || NULL || intersection with '''Required Entity Lining_List''' || || D || Length_Longest || int || NULL || longest length measured in meters || || || Width_Min || int || NULL || measured in meters || || || Width_Max || int || NULL || measured in meters || || || Height_Min || int || NULL || measured in meters || || || Height_Max || int || NULL || measured in meters || || || Orientation || int || NULL || Degrees || || E || Description_Remarks || text || NULL || General Description remarks || |||||||||| 33-43 match sections 4-14 in the Earth locus || == Supplement Forms == === Earth Supplement === |
Data Model
This page describes how we model data from each form from the MPP project. Each form will be treated in a subsection. Loci forms will be treated together.
Loci Forms
Several pieces of each loci form are identical across the three types.
Earth Loci (Color: yellow - most common)
Architectural Loci (Color: pink)
Installation Loci (Color: purple)
Burials (Color: Brown) are not strictly a loci since they do not get a locus number, but are attached to an earth locus. THEREFORE, burial forms are child entities of an earth locus.
Identical Sections include the identity, rationale
Earth Locus
The earth locus sheet is the most common form used. Technically everything under 1. should be identifying (Key). However this is preposterous and we will assign a surrogate key.
Section
Element Identifier
Element Type
Default
Description
0.None
Cleanup
Boolean
False
Check only if debris is interseasonal erosion and if there are pottery, bones, and other objects that need listing
Balk Removal
Boolean
False
Check only if you excavated a locus during the balk removal and you don't have the original locus sheet
1.Identification
A.Locus
Integer
None
IF there exists true in section 0. This is a Cleanup or Removal Excavation NOTE DEV. from Manual due to database constraints.
B.Site
Char
None
Single Char identifier of site
C.Season
Integer
Year(today)
Convention is last two digits of year $\rightarrow$ Bah make it four digits
D.Field
Char
None
Single letter field designation
E.Square
varchar(8)
None
Sample: "6L46" or "A6" seems random.
F.Start_Date
Date
Today()
Sample: 18 Jul 2009 [dd/mm/yyyy]
F.End_Date
Date
NULL
same.
G.Sheet
Integer
NULL
NOT USED!} When we print out sheets they will have page numbers
H.Supervisor
varchar(25)[]
NOT NULL
If you worked on this sheet add your name to the list!
I.BALK
char(1)
NULL
Used for balk removal (seldom used)
J.Designation
varchar(80)
NULL
Free form description of the layer
2.Rational
A.Reason
varchar(80)
NULL
Free form reason for change (Color change,...)
B.Separability.Top
selection
Average
Selection from Required Entity Separability_Listing(ID,{Very Clear, Clear, Average, Unclear, Very Unclear, Arbitrary})
B.Separability.Bot
selection
Average
Bottom of locus is from Separability Entity
3.Description
Description is significantly different across loci forms
A.Color.1.Munsell_Number
varchar(10)
NULL
A.Color.2.Verbal
varchar(50)
NULL
B.Texture.1-4
Mutli-dep
NONE
Intersection table with Texture Required Entity Texture(Texture_ID,Texture_Description)
C.Particle_Shape.1-4
Multi-dep
NONE
Association table with Required Entity Particle_Shape(Particle_Shape_ID,Particle_Description:{Angular, Subangular, Subround, Round) includes percentage
D.1.Consistence.Hardness
int
3
values 1-6
D.2.Consistence.Compactness
int
0
Use list Entity Earth_Compactness(Compactness_ID, Compactness_Description) {Loose, Crumbly, Friable, Firm, Gravelly, Rubbly}X{Slightly, Moderately, Very}
D.3.Consistence.Wetness
int
0
Use list Entry Earth_Wetness(Wetness_ID, Wetness_Description) {Dry, Moist, Wet}X{Slightly, Moderately, Very}
D.4.Consistence.Structure
int
0
Use list Entry Earth_Structure(Structure_ID, Structure_Description) {Puddling water, Channeling water, Sheet wash water, Wind, Talus, Random}
E.1.a-d.Stone_Inclusion
asc
Each inclusion has a distribution associated with it now (a bit more data) Required Entity Inclusion(InclusionTypeID, Description, Class) Class:{Stone, Earth, Artifact, Organic}
E.2.a-f.Earth_Inclusion
asc
Use association table Inclusion include Distribution={Random, Patterned+char, Layered+char}
E.3.a-k.Artifact_Inclusion
asc
Use association table Inclusion include: Frequency, Distribution, Dist_Remark
E.4.a-f.Organic_Inclusion
asc
Use association table inclusion include: Frequency, Distribution
F.Measurements
child
Children will have Locus Identity in Required Entity Locus_Points(OBJECTID, SHAPE, File_Name_Imported, Locus_Identity) Note: OBJECTID and SHAPE are maintained by ArcINFO and we don't mess with them. In this case, it's the key.
G.Surface_Material.1-8
asc
Use association table with Required Entity Surface_Material(Surface_Material_Type_ID, Surface_Material_Description)
4.Stratigraphy.Shape
child
Required Entity Locus_Points(OBJECTID, SHAPE, File_Name_Imported,Locus_Identity
4.Stratigraphy.A-G.Relation
asc
Use association table Stratigraphy_Relation(This_Locus_Identity, Related_Locus_Idenity, Relationship:{Under, Over, Equals, Contiguous to, Seals Against, Cut by, Over Foundation}, remarks)
5.Levels
Spatial Object Query - We now collect all spatial information with the Total Station. Therefore this section now is just a reference to the coordinates take at different times. Use Locus_Points Table
6.Identification
Printed header on subsequent pages - not recorded!
7.Pottery
child
Requires Entity: Locus_Pottery_Bucket(Locus_Identity, Pail_ID, Date, Total_Debris_Baskets, Location, Comments) see figure on p.26
8.Bones
child
Locus_Bone_Bucket Requires Entity: identical to Locus_Pottery_Bucket
9.Seeds
child
Requires Entity: Seeds(Locus_Identity, Pail_ID, Date, Sample#, Location, Reading)
10.Objects
Similar to Seeds model - Requires Entity: Object(Pail\#,Date,Field\#,Spatial Coordinates Set\#,Reading) : Associated with pictures,loci...
11.Photographs
List of photo numbers model - intersection table.
12.Biodata Samples
Bio_Data_Samples
varchar(80)
Pollen
PROGRAMMING: list elements to check, allow additional information to be typed. The combination goes here.
13.Drawings
Intersection Table
NULL
Requires Entity: Drawing(ID,Image,...)
14.Interpretation
A.Fucntion
varchar(500)
NULL
What was this loci used for in antiquity
B.Stratigraphy
varchar(500)
NULL
This is a textual check on the data that we collect with the total station
C.Clean_Locus
boolean
false
Did this layer produce pottery from one period only with no mixing of ceramic horizons? Yes$\rightarrow$ true
D.Locus_Period_Date
varchar(50)
NULL
Excavators dating of the layer
E.Phase
varchar(25)
NULL
Completed later ...
F.Stratum
varchar()
NULL
Completed later ...
Architectural Locus
There is an inconsistancy in MPP that allows an architectural locus to be a subsidiary locus to some other architectural locus. This creates a locus sheet with an identical locus number but a different "locus" making a locus or (sublocus) the most basic element in archaeology. We fix this inconsistancy by moving the J. FOUND(ation) and K.Phase out of the identification and put it into the stratigraphy relationship section. A wall locus then has a architectural-foundation relationship with a foundation instead of having a sub-locus. This makes a substantial change in the Handbook on how to use the forms.
HANDBOOK CHANGE: 15.J and 15.K should list the related locus and relationship type and phase number respectively. The locus gets a unique number. Identification, Rationale = Earth Locus Section Element Identifier Element Type Default Description 17.Description A.Material.1-6 multi-dependency NULL Linked to list containd in Require Entity _Materials_Used_List(LocusID, MaterialID [Note 1], percent:integer), This is associated with another Required Entity Materials_Quantifier_List(Materials_Quantifier_ID, Materials_Quantifier_Description [Note 2]) IF type=Mudbrick, Require Fill out "Earth Supplement Form" A.Masonry.7.Architectural_Fragments_Count int 0 Very rare prior to Hellenistic period A.Masonry.8.Origin_Quarry varchar(50) NULL Rare: Entered by specialist when known A.Masonry.X.Reused Multi-dependency NULL Required Child Entity Reused_Stone(Locus_Found:Locus_ID,Locus_From:Locus_ID, Percent_Mass:Integer) B.Masonry.1.a-f.Wall_Stones Multi-dependency NULL Externally Linked via Required Entity Wall_Stones(Locus_ID,type:char(15)[Note 3], percent:integer) B.Masonry.2.a-c.Chink_Stones Multi-dependency NULL Externally Linked via Required Entity Chink_Stones(Locus_ID,type:char(15)[Note 4], percent:integer) B.Masonry.3.a-f.Fill_Stones Multi-dep NULL Externally Linked via Required Entity Fill_Stones{Locus_ID, type:char(15)[Note 3], percent:integer) B.Masonry.4.Brick_Width_Min int NULL Smallest width dimension of bricks in a brick wall B.Masonry.4.Brick_Width_Max int NULL Largest width dimension of bricks in a brick wall B.Masonry.4.Brick_Length_Min int NULL Smallest length dimension of bricks in a brick wall B.Masonry.4.Brick_Length_Max int NULL Largest length dimension of bricks in a brick wall B.Masonry.4.Brick_Thickness_Min int NULL Smallest thickness dimension of bricks in a brick wall B.Masonry.4.Brick_Thickness_Max int NULL Largest thickness dimension of bricks in a brick wall C.Dressing Multi-dependency NULL Externally Linked via Required Entity Dressing(Locus_ID,type:char(15)[Note 5], percent:integer D.Tooling_Width_Min int NULL Minimum tooling width to describe tool D.Tooling_Width_Max int NULL Maximum tooling width to describe tool D.Tooling_Length_Min int NULL Minimum tooling length to describe tool D.Tooling_Length_Max int NULL Maximum tooling length to describe tool D.Tooling_Images/Photo Multi-dep NULL Drawings or photos will be associated with a locus via 11, 13 entities shown in the earth locus E.Mortar Multi-dep NULL Externally Linked via Required Entity Mortar_Used(Locus_ID,type(char(15)[Note 6], percent:integer) E.Mortar.Thinkness_Avg int NULL Average thickness in cm F.Facing_Type Multi-Variable bit One variable for each type in [Note 7] F.Facing_Images Multi-dep NULL Drawings or photos will be associated with a locus via 11, 13 entities shown in the earth locus F.Description varchar(512) NULL Added descripton field for painted or unique features F.Facing_Color varchar(10) NULL Muncel Color G.Construction.1.Style Multi-Dependency NULL intersection table with Required Entity Construction_Style(Construction_Style_ID, Construction_Style_Description [Note 8]) G.Construction.2.Support multi-dep NULL intersection table with Required Entity Construction_Support(Construction_Support_ID, Construction_Support_Description) [Note 9] G.Construction.3.Tendencies varchar(400) NULL See manual - to catch the mood of the builders... H.Courses.Min_Number int 0 Minimum courses or 0 if random H.Courses.Max_Number int 0 Maximum courses (could be Minimum) or 0 if random H.Courses.Random boolean false Just a check - if you left the others 0 and this false, something is wrong! I.Rows NONE Course is the one brick/block/rock high. Rows indicate the number of rows wide in a course -.1.Minimum_Number int 0 Min number of rows 0 indicates holes or gaps -.1.Maximum_Number int 1 Max number of rows X indicates max number of identifiable rows -.2.Includes_Rubble boolean false -.3.Description varchar(100) NULL Was something unusual? Describe it in 100 characters or less -.4.Random boolean false Does it look like your pathfinder group was given rocks and mortar and told to make a wall? Click yes then. J.Measurements.1.Greatest_Length int 0 Longest part of wall in meters. J.Measurements.2.Width_Min int 0 Narrowest part of wall in meters. J.Measurements.2.Width_Max int 0 Longest part of all in meters. J.Measurements.3.Height_Min int 0 Shortest part of wall in meters. J.Measurements.3.Height_Max int 0 Tallest part of all in meters. J.Measurements.4.Orientation int 0-179 Give the compass direction of the wall from 0-179 degrees. J.Measurements.5.Dip int 0 Give the degree of slope if the wall runs downhill. K.Preservation.1-7 int 1 Look up in Required Entity Wall_Preservation_Description(ID:int, Description:varchar(50)[Note 10]) K.Preservation.8.Lean_Direction int 0 Certainly going to be 90 degrees off of Orientation K.Preservation.8.Lean_Degrees int 0 Use a clinometer to find the lean amount K.Preservation.9.Top_Of_Foundation int 0 Elevation in Meters L.Remarks varchar(320) NULL Did we miss anything? Put it here. You got 320 characters (4 lines of text) to do it in. 18-28 match sections 4-14 in the Earth locus Notes: Choose {Cobble [6-25 cm), Sm Boulder [25-50 cm), Md Boulder [50-75 cm), Lg Boulder[75-100 cm), Vlg Boulder (>=1 m)} Choose {Boulder & Chink, Ashlar Fit, Header-stretcher, Rubble-filled, Rubble, Stacked Bricks, Tied-in Bricks, Quoin & Pier, Orthostat, [Allow Additional]} (E) - Requires Earth Supplement Sheet. NOTE ALSO, we now associate supplement sheets with a locus including an association field to describe the element of the locus supplemented. (draw) - Requires Facing image NOTE ALSO, we now associate drawings and photos with a locus including an association field to describe the element of the locus drawn or photographed.
Installation Loci are unique in that they have a type section and a qualifier to identify how certain we are of that type. We also allow new types of installations be be added. The Material Section is identical to 17.A Material section in the Architectural locus except that we allow more types of materials. SO WE MAKE THE SALOMON LIKE DECISION TO USE THAT TABLE OF MATERIALS. Section Element Identifier Element Type Default Description 29-30 match sections 1-2 in the Earth locus TYPE Installation_Type_ID int NULL References Required Entity Installation_Type_List(Installation_Type_ID:int, Installation_Type_Description:varchar(25)) Installation_Qualifier_ID int NULL References Required Entity Installation_Qualifier_List(Certainty_Qualifier_ID:int, Certainty_Qualifier_Description:varchar(25)) 32.A match section 17.A in the Architectural locus. See the notes above. B Plan_ID int NULL references Required Entity Plan_List(Plan_ID, Plan_Description) Plan_Qualifiers Multi-Dep. NULL intersection with Required Entity Plan_Qualifiers Plan_Remarks varchar(255) NULL Plan Remarks C Lining Multi-Dep NULL intersection with Required Entity Lining_List D Length_Longest int NULL longest length measured in meters Width_Min int NULL measured in meters Width_Max int NULL measured in meters Height_Min int NULL measured in meters Height_Max int NULL measured in meters Orientation int NULL Degrees E Description_Remarks text NULL General Description remarks 33-43 match sections 4-14 in the Earth locus
Installation Locus
Supplement Forms
Earth Supplement